SILABUS TRAINING SISTEM GROUND DAN PERLINDUNGAN LISTRIK

Deskripsi Training Electrical Grounding and Shielding Electronic Systems

This course stresses the fundamental electromagnetic compatibility principles involved in typical grounding and shielding problems. Understanding the objectives and techniques for grounding and shielding will reduce misconceptions and allow a more systematic approach to replace trial and error methods. For example, the course explains why a signal ground is not the same as a signal return.

Also, solutions for the numerous problems caused by wiring inductance are described and demonstrated. The course emphasizes the development of logical diagnostic techniques for identifying various types of noise problems. Often, the correct identification of the problem is more difficult than the solution. The course is at an introductory level; however, some knowledge of electronic circuits and system design is assumed. Several interference mechanisms and shielding techniques are demonstrated.

Menimbang cukup kompleknya materi pelatihan Electrical Grounding And Shielding Electronic Systems ini bagi peserta, dibutuhkan training provider yang berpengalaman di bidangnya agar tidak membuat peserta tidak menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

Tujuan Training Electrical Grounding and Shielding Electronic Systems

Dengan mengikuti pelatihan Electrical Grounding Peserta dapat berbagi pengetahuan / sharing knowledge mengenai Shielding Electronic Systems dengan peserta dari perusahaan lain yang bergerak di bidang Engineering

This course is designed to enable participants to:

• Define electrical ground, signal ground, and signal return
• Describe various grounding techniques
• Diagnose noise problems
• Identify methods to reduce and filter noise
• Define inductive and capacitive shielding
• Describe techniques for reducing electromagnetic coupling
• Select appropriate cabling
• Identify methods to ensure impedance matching
• Identify noise coupling mechanisms

Materi Training Electrical Grounding and Shielding Electronic Systems

I. Basic Principles of Noise Reduction

1. Importance of wiring inductance
2. Bandwidth of pulse waveforms
3. Noise coupling mechanisms
4. How to identify the mechanism
5. Common and differential modes

II. Grounding: Why and How?

1. What is electrical ground?
2. Reasons for grounding
3. Signal ground, signal return
4. Ground grid technique
5. Isolated grounding technique
6. Ground loop noise reduction

III. Signal Ground Techniques

1. Ground each current only once
2. Unsafe signal grounding
3. Single point versus ground grid
4. Signal isolation techniques

IV. How to Diagnose Noise Problems

1. Ringing, rounding, and reflections
2. Effects of signal impedance distribution on susceptibility
3. Practical diagnostic techniques
4. Noise coupling examples

V. Noise Reduction Techniques

1. Filtering and shielding
2. Reducing mutual inductance

VI. Filtering Conducted Noise

1. CM and DM filter techniques
2. Improving circuit balance
3. 1 GHZ filtering techniques
4. DC power bus design

VII. Inductive and Capacitive Shielding

1. Self-shielding techniques
2. Misuse of twisted pair
3. Grounding cable shields
4. Shielding examples

VIII. Reducing Electromagnetic Coupling

1. Identifying EM coupling
2. Controlling CM currents

Metode Training Electrical Grounding and Shielding Electronic Systems

Metode Training Electrical Grounding And Shielding Electronic Systems dapat menggunakan fasilitas training zoom atau training online, dan bisa juga training offline atau training tatap muka.

Peserta Training Electrical Grounding and Shielding Electronic Systems

Peserta yang dapat mengikuti training Electrical Grounding And Shielding Electronic Systems ini adalah yang ingin mendalami bidang Engineering

This course is recommended for electrical engineers, technicians, designers and release engineers responsible for electronic or electromechanical products.

Instructor Training Electrical Grounding and Shielding Electronic Systems

Instruktur yang berkompeten di bidang Engineering

Ir. Teguh Santoso

Ir. T. Haryono, M.Sc., CEng MIEE

Jadwal Berdiklat Training 2024:

• Batch 1 : 6 – 7 Januari 2025 || 15 – 16 Januari 2025 || 22 – 23 Januari 2025
• Batch 2 : 3 – 4 Februari 2025 || 12 – 13 Februari 2025 || 27 – 28 Februari 2025
• Batch 3 : 5 – 6 Maret 2025 || 10 – 11 Maret 2025 || 19 – 20 Maret 2025
• Batch 4 : 14 – 15 April 2025 || 23 – 24 April 2025
• Batch 5 : 5 – 6 Mei 2025 || 14 – 15 Mei 2025 || 26 – 27 Mei 2025
• Batch 6 : 2 – 3 Juni 2025 || 11 – 12 Juni 2025 || 18 – 19 Juni 2025 || 23 – 24 Juni 2025
• Batch 7 : 2 – 3 Juli 2025 || 16 – 17 Juli 2025 || 30 – 31 Juli 2025
• Batch 8 : 4 – 5 Agustus 2025 || 13 – 14 Agustus 2025 || 20 – 21 Agustus 2025 || 29 – 30 Agustus 2025
• Batch 9 : 3 – 4 September 2025 || 10 – 11 September 2025 || 15 – 16 September 2025 || 24 – 25 September 2025
• Batch 10 : 8 – 9 Oktober 2025 || 13 – 14 Oktober 2025 || 22 – 23 Oktober 2025
• Batch 11 : 3 – 4 November 2025 || 12 – 13 November 2025 || 19 – 20 November 2025 || 26 – 27 November 2025
• Batch 12 : 1 – 2 Desember 2025 || 10 – 11 Desember 2025 || 17 – 18 Desember 2025 || 26 – 27 Desember 2025

 

Ayo, jangan ragu lagi! Daftarkan segera dengan chat melalui pesan Whatsapp (Fast Respons). Dapatkan pengalaman terbaik dari tim trainer yang berkompeten.
Harga setiap kota akan berbeda serta semakin banyak peserta dalam 1 instransi yang sama, pun akan lebih murah. Untuk informasi lebih lanjut hubungi kami segera.

Investasi dan Lokasi pelatihan:

• Yogyakarta
• Jakarta
• Bandung
• Bali
• Surabaya

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas :

• Module / Handout
• Sertifikat
• FREE Bag or bagpackers (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2xCoffe Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive
• Training room full AC and Multimedia