PIPING AND PIPELINE: DESIGN, INSTALLATION, OPERATION

PIPING AND PIPELINE: DESIGN, INSTALLATION, OPERATION TRAINING

This special practical approach course is designed to provide a comprehensive understanding of appliedpiping and pipeline technology: design aspects of piping & pipeline system, selection of materials andtypes of pipes, flanges, valves and fittings, handling of those materials, welding & installation techniques andprocedures, and the operation, inspection and maintenance of oil & gas piping and pipeline systems.

WHAT PARTICIPANT WILL GET :

After completion of this special course participant will:

a. Better understand the description, classification, requirement and specification of pipes, flanges, valvesand fittings used for oil and gas transportation operation

b. Improve ability on design, installation and maintenance

c. Interpret and evaluate pipeline operation performance data

d. Identify and solve problems in oil and gas transportation pipeline

WHO SHOULD ATTEND?

Technical and non-technical personnel of Oil and Gas Company who involves in or concern with design,selection, handling, installation, operation and maintenance of up-stream and down-stream oil and gaspipelines and/or industrial piping and those who responsible in stability of oil and gas or industrial fluidtransportation through pipeline system.

COURSE OUTLINE:

In this specially designed practical course participants will learn from and discuss with professional instructor the following subjects:

1. Oil & Gas Flow Stream Characteristics, Equipment and Facilities

• Hydrocarbon Properties and Oil & Gas Fluid Flow Characteristics
• Multi-phase Flow Gathering Lines, Manifolds and Accessory Equipment
• Oil & Gas Separation Stations and Facilities
• Water Treating and Disposal Equipment, Transportation Lines & Facilities
• Gas Treating and Processing Equipment, Transmission Lines & Facilities

2. Piping & Pipeline Materials, Standards and Codes

• Steel Materials for Piping & Pipeline
• Metallic Materials for Valves, Flanges and Fittings
• Piping Manufacturing Methods and Variation ofProducts
• Oil & Gas Pipeline Related Standards and Codes
• API 5L Line Pipe Specifications

3. Pipeline Operation Principles

• Piping & Pipeline Layout, Topography and Configuration
• Principles of Fluid Flow and Practical Flow Equation
• Multi-phase and Single-phase Oil & Gas Transportation/Transmission Practice
• Pump Operation in Oil and Water Pipeline system
• Compressor Operation in Gas Pipeline system

4. ANSI B.31 Series Standards and Requirements

• Preliminary Selection of Economic Diameter for Minimum Investment
• Stress Formula for Wall Thickness and Design Pressure Computation
• Pipeline Economics Computation Methods
• Oil or Water Transportation Pipeline Design Concept
• Gas Transmission Pipeline Design Concept

5. Pipeline Construction and Installation

• Choice of Design Procedure
• Stress Computation Methods in Design and Construction
• Pipeline Concrete Coating Parameters
• Hydrostatic Testing Requirements
• Construction/Installation Material Requirements

6. Pipeline Maintenance and Pigging Operation

• Potential Operating Problems and Maintenance of Pipeline Systems
• Inspection Techniques for Potential Failures and Wall Thickness & MAWP Reduction
• Pipeline Cleaning and Pigging Operations
• Pipeline Internal Maintenance and Chemical Injection
• Pipeline External Maintenance and the Cathodic Protection

7. Access Fittings for Maintenance, Chemical Injection and Monitoring

• Access Fitting Specifications, Configurations and Materials
• Chemical Injection, Fluid Sampling and Monitoring Equipment & Facilities
• Chemical Inhibitor, Scale Inhibitor and Biocide Materials
• On-line Corrosion and Scale Monitoring Techniques
• NACE Standards and Computation Methods for Pipeline Monitoring

Course Leader: Hilman Ahmad

TUJUAN :

Setelah pelatihan peserta diharapkan dapat memahami teori dasar tentang Pompa dan Kompresor, dapat mengoprasikan, menginstalasi, merawat, dan memecahkan masalah yang timbul pada Pompa dan Kompresor.

CAKUPAN MATERI TRAINING POMPA DAN KOMPRESOR :

• Dasar-dasar Mekanika Fluida : ( Aliran fluida : laminar, turbulen, Persamaan konstinuitas, Bernoully, Head, NPSH, water hammer).
• Konsep Dasar Termodinamika : (tekanan, temperature, system terbuka, tertutup, proses & siklus, bentuk-bentuk energy, hukum termodinamika, balance enery).
• Dasar-dasar Pompa dan Kompresor
• Pompa Sentrifungal (Klasifikasi, konstruksi dan instalasi pompa, standar pompa).
• Pemilihan Pompa (diagram indicator pompa, grafik kinerja pompa)
• Instalasi pompa (pemasangan seri & parallel)
• Perawatan berkala pompa (harian, mingguan, bulanan, tiga bulanan, enam bulanan, tahunan, overhaul)
• Pompa Rotari dan Submersible (instalasi & standar)
• Pengujian Pompa
• Kompresor (jenis-jenis/kalsifikasi, konstruksi, pengendalian tekanan).
• Trobleshooting Pompa dan Kompresor.

INSTRUKTUR :

Ir. M.Munir Fahmi, Dipl.ME.,MT. and Team

Jadwal Berdiklat Training 2020 :

• 8 sd 9 Januari 2020
• 22 sd 23 Januari 2020
• 5 sd 6 Februari 2020
• 19 sd 20 Februari 2020
• 4 sd 5 Maret 2020
• 18 sd 19 Maret 2020
• 1 sd 2 April 2020
• 15 sd 16 April 2020
• 6 sd 7 Mei 2020
• 20 sd 21 Mei 2020
• 10 sd 11 Juni 2020
• 24 sd 25 Juni 2020
• 9 sd 10 Juli 2020
• 23 sd 24 Juli 2020
• 13 sd 14 Agustus 2020
• 27 sd 28 Agustus 2020
• 10 sd 11 September 2020
• 24 sd 25 September 2020
• 8 sd 9 Oktober 2020
• 22 sd 23 Oktober 2020
• 5 sd 6 November 2020
• 18 sd 19 November 2020
• 3 sd 4 Desember 2020
• 17 sd 18 Desember 2020

Investasi dan Lokasi pelatihan:

• Yogyakarta
• Jakarta
• Bandung
• Bali
• Surabaya
• Lombok

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas :

• FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
• Module / Handout 
• Flashdisk
• Sertifikat 
• FREE Bag or bagpackers (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2xCoffe Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive
• Training room full AC and Multimedia