PELATIHAN SUBMERSIBLE PUMP

Office

Gedung Yayasan Darul Marfu
Jalan H. Zainuddin No. 43, Radio Dalam
Kebayoran Baru, Jakarta Selatan, 12140

POMPA RENDAM

TRAINING POMPA RENDAM: INSTALATION.OPERATION AND MAINTENANCE

DESCRIPTION
This course is to summarize the state of the art of teknologi pompa rendam. It included the example problems to illustrate the use of various theoretical solutions, it also listed an overview of conventional well productivity and Inflow Performance Relationship (IPR) technology and is general introduction to the latest methods of  production optimization using ESP technology.
This course compiled as aid to engineers and production people in the Petroleum Industry who have the responsibility of planning and selecting electrically driven submersible pumping equipment. Included are fundamental principles involving sizing, operation and trouble shooting of submersible pump equipment. Also included are tables, data and general information which it will be value to everyone who utilize s submersible pumping equipment.
Much material of this course has been published previously and is reassembled in this course. However, there is also a considerable amount of new material included that will assist the participants of the course  in their pump selection and operation.
Designing a submersible pump installation is not an exact science; it is mostly an art. But it is a talent which can be easily acquired if care and attention are paid to what the well is telling us, and what we want to do with the well. The well conditions vary from one well to other, but the basic information required for a design does not. What we require from a particular well must, of course, be within the limits of the well in question.
This course is mainly directed to the practicing professionals who make engineering calculations and decision on submersible pump application and troubleshooting. For managers, the course helps to review the present state of the art. It also outlined some of new method in artificial technology exist today. These gaps in technology will be useful for research engineers and research professionals to determine the areas of future research.

OUTLINE OF INSTALATION, OPERATION AND MAINTENANCE  OF POMPA RENDAM

•    Introduction
•    Hydraulic& Electrical Fundamentals
o    Introduction
o    Hydraulic Fundamentals
o    Centrifugal Pump Hydraulics
o    Well Performance
o    Electricity Fundamentals
•    Equipment Description
o    Introduction
o    Centrifugal Pump
o    Rotary Gas Separator
o    Seal Section
o    Electrical Submersible Motor
o    Generalized Motor Composite Curves
o    Motor Controllers
o    VSC Effects on ESP Components
o    Down hole Pressure and Temperature Monitors
o    Transformers
o    Junction Box
o    Wellhead
o    Check Valve
o    Drain Valve
o    Backspin relay
o    Centralizer
o    Cable
o    Cable Bands
o    Motor Lead Extension
•    Typical ESP Applications
o    Introduction
o    Shrouded Configuration
o    Booster Pump
o    Direct Production-Injection-System
o    Horizontal Injection System
o    Cantle slopeâ Injection System
o    ESP Installation with Deep Set Packer
o    ESP Installation with “Y” Tool
o    Bottom Intake Booster Pump
o    Operation of Submersible Pumps in Harsh Environments
•    Equipment Sizing
o    Introduction
o    Basic Data Required
o    Sizing Procedure High-Water-Cut
o    Sizing example : High-Water-Cut
o    Effect of Viscosity on Centrifugal Pump Performance
o    Sizing Procedure for Viscous Fluids
o    Sizing Example: Viscous Fluids
o    Sizing Procedure High GOR
o    Sizing Example High GOR
o    Sizing Procedure Variable Speed
o    Sizing Example: Variable Speed
•    Installation Maintenance and Trouble shooting
o    Introduction
o    Equipment Transportation
o    Equipment Handling
o    Well Preparation
o    Installation of Down hole Equipment
o    Installation of Surface Equipment
o    Starting  ESP
o    Testing
o    Data Gathering
o    Re-running Equipment
o    Economic Evaluation
o    Failure Analysis
o    Ammeter Technology
o    Field Checkout
o    ESP Troubleshooting Chart
•    Engineering Data
o    Electrical Terms and Definition
o    Useful Formulas
o    Relationships Regarding Flow and Pressure drops in Pipes
o    Temperature Rise in Pumps
o    Measurement for Water Flow
o    Areas of Circles
o    Conversion Factors
o    Temperature Conversion Table
o    Fundamental Unit of Length, Area, Volume and Mass
o    Conversion Factors For Units of Energy
o    Casing and Tubing Sized and Capacities
o    Stretch of  Suspended Casing, Tubing or Drill Pipe
o    Tubing Weight in Fluid
o    Hydrostatic Head
o    Well Temperature versus Current
o    Absolute Viscosity of Gas-Free Crude Oil, Centipoises
o    Absolute Viscosity of Gas-Saturated Crude Oil, Centipoises
o    Pressure Loss Charts
o    Flow Loss due to Friction in API. Pipe (U.S)
o    Inflow Performance relationship Equations
•    Installation, Operating And Troubleshooting The Pump
•    Cases study and discussion

PARTICIPANTS
Reservoir Engineer/ Superintendent/ Supervisor Rotating Engineer/ Superintendent/ Supervisor Production, Power Plant Engineer/ Superintendent/ Supervisor Petroleum Engineer Everybody who wants to add the knowledge and gain benefits from this course

INSTRUKTUR
Yogya: Ir. Nursuhascaryo, MT

Bandung DR. Ir. Sudjati Rachmat, DEA
Pengajar di jurusan perminyakan ITB sejak tahun 1979 – sekarang. Beliau alumnus ITB tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.
Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

DURASI
4 hari

Jadwal Training Teknologi Pompa Rendam terupdate di tahun 2016 adalah sebagai berikut:
•    05 – 07 Januari 2016
•    03  – 05 Februari 2016
•    22 – 24 Maret 2016
•    12 – 14 April 2016
•    02 – 04 & 09 – 11 Mei 2016
•    01 – 03 Juni 2016
•    19 – 21 Juli 2016
•    15 – 16 Agustus 2016
•    07 – 09 September 2016
•    11 – 13 Oktober 2016
•    15 – 17 November 2016
•    07 – 09 & 21 – 23 Desember 2016

*Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Training Teknologi Pompa Rendam:
•    Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
•    Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
•    Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
•    Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)

•    Surabaya, Hotel Amaris (6.000.000 IDR / participant)
•    Lombok, Hotel Jayakarta(7.500.000 IDR / participant)

Investasi Training Teknologi Pompa Rendam tahun 2016 ini :
•    Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
•    Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

🙂

Be the first to comment

Leave a Reply

Alamat email Anda tidak akan dipublikasikan.


*