Daftar ISI
SILABUS TRAINING MAINTENANCE AND TROUBLESHOOTING OF CONVEYORS AND CHUTES
DESKRIPSI TRAINING MAINTENANCE AND TROUBLESHOOTING OF CONVEYORS AND CHUTES
MAINTENANCE AND TROUBLESHOOTING OF CONVEYORS AND CHUTES
(3 days training)
The workshop will cover basic conveyors, selection, safety, legal obligations, terminology and background and an optional third day will deal with the nuts and bolts of conveyor, chute and feeder design. Belt conveyors frequently provide the most satisfactory and economical method of transporting materials such as mine ores, earth, sand, crushed stone, cement and concrete. The high and continuous speed of operation of the belt makes for a high capacity of transport of materials.
This workshop is designed for engineers and technicians from a wide range of abilities and backgrounds and will provide an excellent introduction to troubleshooting, maintenance and basic design rules of conveyors and chutes. It is intended to cover the fundamentals of belt conveying and would be useful for those with little experience in this area. Before commencing a detailed course on conveyors it is important to have a solid practical knowledge of the material to be conveyed.
A basic knowledge is provided of the bulk materials characteristics and properties. This will enable you to have a far stronger ability to troubleshoot and design workable conveyors systems. Numerous tips throughout the course make it practical and topical. You will also engage in problem solving and case studies to absorb the materials as quickly and effectively as possible.
Menimbang cukup kompleknya materi pelatihan Maintenance And Troubleshooting Of Conveyors And Chutes ini bagi peserta, dibutuhkan training provider yang berpengalaman di bidangnya agar tidak membuat peserta tidak menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.
TUJUAN TRAINING MAINTENANCE AND TROUBLESHOOTING OF CONVEYORS AND CHUTES
Dengan mengikuti pelatihan Maintenance And Troubleshooting Of Conveyors And Chutes Peserta dapat berbagi pengetahuan / sharing knowledge mengenai Maintenance And Troubleshooting Of Conveyors And Chutes dengan peserta dari perusahaan lain yang bergerak di bidang Mechanical
MATERI TRAINING MAINTENANCE AND TROUBLESHOOTING OF CONVEYORS AND CHUTES
- INTRODUCTION
• Fundamentals of bulk materials handling
• Nature of bulk solids
• Characteristics of generally used bulk materials
• Conveyors and chutes overview
• Practical Exercise - BELT CONVEYING
• Introduction
• Layout
• Basic Configuration
• Components of a standard conveyor
• Capacity of belt conveyors and selection of belt width
• Selection of other components (belt, idlers, pulleys and takeups etc.)
• Simple calculation of belt tension
• Selection of drive
• Troubleshooting tips
• Take ups
• Operation and maintenance of belts
• Tips for cost savings
• Practical Exercise - SAFETY OF CONVEYORS
• Conveyor safety standard
• General background on AS 4024.1 (RA and hazard recognition)
• Hazard recognition
• History of accidents
• Key conveyor safety issues
• Demonstration of unsafe conveyors
• AS 1755 conveyors
• Chute doors hazards and controls
• Case Study
• Practical Exercise - MAINTENANCE AND TROUBLESHOOTING OF CONVEYORS
• Troubleshooting conveyor problems
• Types of joints
• Splice failures
• Splice inspections
• Splice repairs
• Typical problems
• Root cause process
• Systematic approach for tracking
• Site specific problems
• Case Study
• Practical Exercise - CHUTE MAINTENANCE AND TROUBLESHOOTING
• Transfer chutes theory
• Laser scanning applications
• Best practice design
• Boosting flow
• Troubleshooting chutes
• Spillage and buildup
• The awkward marriage of conveyorsand chutes
• Practical Exercise - FEEDERS MAINTENANCE AND TROUBLESHOOTING
• Belt, apron, screw and other feeders
• Optimum draw down
• Troubleshooting typical problems
• Practical Exercise - STORAGE AND FLOW
• Flow properties of materials
• Funnel – flow and expanded flow
• Flow rate analysis
• Gravity reclaim
• Bin wall pressures
• Practical Exercise - PRACTICAL CONVEYOR DESIGN
• Review of bulk material characteristics
• Layout
• Component selection
• Lump size limitation
• Capacity
• Minimum pulley diameters
• Burden cross sectional area calculations
• Volumetric capacity
• Velocity calculations
• Idler spacing and load rating
• Belt tension calculations
• Drive arrangements
• Power demand capacity
• Starting and stopping
• Start up current calculations
• Vertical curves
• Gearbox and drive selection
• Safety factors
• Bearing types and selection
• Conveyors design calculations Exercises - CHUTE DESIGN
• Liner selection
• Use of solidworks
• DEM and application to transfer design
• Stress analysis using cosmos
• Chute Design Exercise - FEEDER DESIGN
• Calculation of loads/drive torques and power
• Feeder selection
• Feeder Design Exercise - APPLICATIONS AND FUTURE TRENDS
• Case studies
• Future trends in conveyors, feeders and chutes
PESERTA TRAINING MAINTENANCE AND TROUBLESHOOTING OF CONVEYORS AND CHUTES
Peserta yang dapat mengikuti training Maintenance And Troubleshooting Of Conveyors And Chutes ini adalah yang ingin mendalami bidang Mechanical.
Maintenance Engineers, Technicians and Staff, Plant Engineers, Operation, Maintenance, Inspection and Repair Managers, Supervisors and Engineers, Mechanical Engineers and Technicians, Design Engineers, Electrical Engineers and Technicians, Consulting Engineers
METODE TRAINING MAINTENANCE AND TROUBLESHOOTING OF CONVEYORS AND CHUTES
Metode Training Maintenance And Troubleshooting Of Conveyors And Chutes dapat menggunakan fasilitas training zoom atau training online, dan bisa juga training offline atau training tatap muka.
- Presentasi
- Diskusi
- Case Study
- Simulasi
- Evaluasi
INSTRUCTOR TRAINING MAINTENANCE AND TROUBLESHOOTING OF CONVEYORS AND CHUTES
Instruktur yang berkompeten di bidang Mechanical
Victor Malau, Ph D dan Team
(Pakar dalam bidang Maintenance, akademisi dan sekaligus praktisi, yang telah berpengalaman dalam memberikan training & consulting pada organisasi/perusahaan milik pemerintah maupun swasta)
Jadwal Berdiklat Training 2024:
- Batch 1 : 6 – 7 Januari 2025 || 15 – 16 Januari 2025 || 22 – 23 Januari 2025
- Batch 2 : 3 – 4 Februari 2025 || 12 – 13 Februari 2025 || 27 – 28 Februari 2025
- Batch 3 : 5 – 6 Maret 2025 || 10 – 11 Maret 2025 || 19 – 20 Maret 2025
- Batch 4 : 14 – 15 April 2025 || 23 – 24 April 2025
- Batch 5 : 5 – 6 Mei 2025 || 14 – 15 Mei 2025 || 26 – 27 Mei 2025
- Batch 6 : 2 – 3 Juni 2025 || 11 – 12 Juni 2025 || 18 – 19 Juni 2025 || 23 – 24 Juni 2025
- Batch 7 : 2 – 3 Juli 2025 || 16 – 17 Juli 2025 || 30 – 31 Juli 2025
- Batch 8 : 4 – 5 Agustus 2025 || 13 – 14 Agustus 2025 || 20 – 21 Agustus 2025 || 29 – 30 Agustus 2025
- Batch 9 : 3 – 4 September 2025 || 10 – 11 September 2025 || 15 – 16 September 2025 || 24 – 25 September 2025
- Batch 10 : 8 – 9 Oktober 2025 || 13 – 14 Oktober 2025 || 22 – 23 Oktober 2025
- Batch 11 : 3 – 4 November 2025 || 12 – 13 November 2025 || 19 – 20 November 2025 || 26 – 27 November 2025
- Batch 12 : 1 – 2 Desember 2025 || 10 – 11 Desember 2025 || 17 – 18 Desember 2025 || 26 – 27 Desember 2025
Ayo, jangan ragu lagi! Daftarkan segera dengan chat melalui pesan Whatsapp (Fast Respons). Dapatkan pengalaman terbaik dari tim trainer yang berkompeten.
Harga setiap kota akan berbeda serta semakin banyak peserta dalam 1 instransi yang sama, pun akan lebih murah. Untuk informasi lebih lanjut hubungi kami segera.
Investasi dan Lokasi pelatihan:
- Yogyakarta
- Jakarta
- Bandung
- Bali
- Surabaya
Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.
Fasilitas :
- Module / Handout
- Sertifikat
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2xCoffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
- Training room full AC and Multimedia