PELATIHAN ALIGNMENT AND BALANCING IN ROTATING EQUIPMENT

TRAINING ALIGNMENT AND BALANCING IN ROTATING EQUIPMENT

ALIGNMENT AND BALANCING IN ROTATING EQUIPMENT

(3 days training)

DESKRIPSI
Misalignment and unbalance are two major causes of vibration in rotating equipment, vibration that means increased maintenance and reduced machine life. With proper alignment and balancing programs, reductions in maintenance and operating costs can easily reach into six figures per year. When shafts are misaligned, forces are generated that can produce stresses on the rotating and stationary components. Even when couplings do not fail from the stresses produced by gross misalignment, bearings and seals will most certainly fail under these conditions. In extreme cases of misalignment, even the shafts may fracture and break. Out-of-balance machine components are a principal cause of machinery vibration. The condition often is caused by less-than-perfect manufacturing, and it is routine for rotating equipment, reciprocating machines and vehicles. Mass balancing may be necessary if an operation or product requires quiet operation, high speeds, long bearing life, operator comfort, controls free of malfunctioning or a quality feel. There are three types of balancing machines: static balancing stands, hard bearing machines, and soft bearing machines. Static balancing stands do not require spinning up and can correct for static or single-plane unbalance only. They feature low cost and safe operation.

MATERI
OUTLINE MATERI :
1.    Mechanical Equipment Overview
2.    Rim and Face Alignment
3.    Reverse Dial Indicator Alignment
4.    Determine Balance Weight
5.    Combine Balance Weights
6.    Single Plane Balancing
7.    Dual Plane Balancing
8.    Laser Alignment & Balancing

PESERTA
Para karyawan di semua lini bagian Plant and Pipeline Operators, Supervisors, Engineers and Manager

METODE    INSTRUKTUR
•    Presentasi
•    Diskusi
•    Case Study
•    Simulasi
•    Evaluasi

Victor Malau, Ph.D and Team
(Pakar dalam bidang Mechanical & Maintenance, akademisi dan sekaligus praktisi, yang telah berpengalaman dalam memberikan training & consulting pada organisasi/perusahaan milik pemerintah maupun swasta)

Jadwal Berdiklat Training 2022

:

  • Batch 1 : 12-13 Januari 2022 | 25–26 Januari 2022
  • Batch 2 : 09-10 Februari 2022 | 22–23 Februari 2022
  • Batch 3 : 08-09 Maret 2022 | 23–24 Maret 2022
  • Batch 4 : 06–07 April 2022 | 19–20 April 2022
  • Batch 5 : 11-12 Mei 2022 | 18–19 Mei 2022
  • Batch 6 : 07–08 Juni 2022 | 28–29 Juni 2022
  • Batch 7 : 12–13 Juli 2022 | 20–21 Juli 2022
  • Batch 8 : 03–04 Agustus 2022 | 23-24 Agustus 2022
  • Batch 9 : 06–07 September 2022 | 20–21 September 2022
  • Batch 10 : 04–05 Oktober 2022 | 18–19 Oktober 2022
  • Batch 11 : 02-03 November 2022 | 16–17 November 2022 | 29–30 November 2022
  • Batch 12 : 07–08 Desember 2022 | 14–15 Desember 2022

 

Kisaran Rp 5.000.000,- an (**syarat dan ketentuan berlaku**)
Harga setiap kota akan berbeda serta semakin banyak peserta dalam 1 instransi yang sama, pun akan lebih murah. Untuk informasi lebih lanjut hubungi kami segera.

Investasi dan Lokaspelatihan:

  • Yogyakarta
  • Jakarta
  • Bandung
  • Bali
  • Surabaya
  • Lombok

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  • Module / Handout
  • Flashdisk
  • Sertifikat
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive
  • Training room full AC and Multimedia