PELATIHAN Uninterruptible Power Supply (UPS) Systems Electrical

Alamat Kantor

Jalan Raya Tajem, Dukuh Pokoh Baru, Perum Kampung Asri 2 No B2, RT 2 / RW 19,
Kelurahan Wedomartani, Kec. Ngemplak, Kab. Sleman,
Daerah Istimewa Yogyakarta, 55584.

Bagikan :
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

pelatihanpelatihan uninterruptible power supply (ups) systems electrical

Uninterruptible Power Supply (UPS) Systems Electrical

Course Description:
Uninterruptible Power Supply  This technical course begins with a discussion of the need for UPS systems. It then covers the relative comparisons between various UPS topologies and their modes of operation. The batteries used for UPS systems are covered next. How a battery works, their maintenance, safety and testing is throughly discussed.

A solid working knowledge of the typical electrical components found within a UPS is developed before exploring how AC is converted to DC and then inverting DC back to AC. When all of the above elements of a UPS are understood, a theoretical rectifier and inverter feedback loop are throughly discussed. This will be followed by a trouble shooting exercise. Students are given failure scenarios where they work in groups to find which circuit component has opened, shorted or significantly changed in value to produce the alarm condition described. The course finishes with a general discussion on UPS system trouble shooting.

Some working knowledge of basic electrical engineering principles is required, although this will be revised at the beginning of the course. Real-life experience in working with batteries and UPS systems will enable the workshop to be placed in context.

Who Should Attend:
This course is recommended for:

•    Electrical Engineers
•    Electrical Maintenance Tradespeople & Technicians
•    Instrumentation and Control Engineers
•    Power System Protection and Control Engineers
•    Building Service Designers
•    Data Systems Planners and Managers
•    Other electrical personnel involved in the maintenance industrial, commericial and institutional power systems.

Course Outline:

I. Introduction to UPS Systems

    * Power conditioners
* Uninterruptible power systems
* Power quality source alternatives
* Power disturbance cost comparisons

II. Three General Types of UPS’s

    * Kinetic (Motor Generator Sets)
* Flywheel
* Static and Components
* Rectifier
* Batteries
* Inverter

III. Three types of Static UPS’s

    * Traditional UPS
* Static UPS
* Static UPS with Bypass

IV. UPS Operation Overview

    * The Need for UPS System
* Power System Disturbances
* Basic Type of UPS Systems

V. Introduction to Batteries

    * Primary Batteries
* Secondary Batteries

VI. Lead Acid Batteries

    * Chemistry
* Different types
* Capacity Factors
* S-Curves
* Battery Safety and Maintenance
* Float and Equalize Voltages
* Load Testing

VII. Nickel Cadmium Batteries

    * Chemistry
* Battery Types
* Capacity Factors
* Battery Safety and Maintenance
* Float and Equalize Voltages
* Load Testing

VIII. Passive Electronic Components

    * Resistors Circuits
* Capacitor Circuits
* Inductor Circuits

IX. Semiconductors

    * Diodes
* SCR’s
* Transistors

X. Logic Gates

    * AND/NAND Gates
* OR/NOR Gates
* Inverter Gate
* D Type Flip Flop
* XOR/XNOR Gates

XI. Operational Amplifiers

    * Inverting Op Amp
* Non-inverting Op Amp
* Differential Op Amp
* Unity Gain Op Amp
* Summing Op Amp
* Integrating Op Amp
* Comparator Op Amp

XII. AC to DC Conversion

    * Full Bridge
* Three Phase
* Six Pulse

XIII. DC to AC Inversion

    * Quasi Square wave
* PWM waveform

XIV. UPS System Overview

    * Rectifier Stage
* Inverter Stage

XV. UPS System Troubleshooting

    * Basic Use of Test Equipment
* Rectifier Troubleshooting
* Inverter Troubleshooting

Jadwal Pelatihan Berdiklat.com :

  • 2 sd 4 Januari 2018
  • 13 sd 15 Februari 2018
  • 27 sd 29 Maret 2018
  • 17 sd 19 April 2018
  • 7 sd 9 Mei 2018
  • 29 Mei sd 1 Juni 2018
  • 12 sd 14 Juni 2018
  • 17 sd 19 Juli 2018
  • 14 sd 16 Agustus 2018
  • 12 sd 14 September 2018
  • 16 sd 18 Oktober 2018
  • 21 sd 23 November 2018
  • 4 sd 6 Desember 2018
  • 26 sd 28 Desember 2018

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Invetasi dan Lokasi Pelatihan Berdiklat.com :

  • Yogyakarta, Hotel Dafam Malioboro, Hotel Cavinton (6.500.000 IDR / participant)
  • Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
  • Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
  • Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
  • Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant)
  • Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Training di Berdiklat.com :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  • FREE Akomodasi Peserta ke tempat pelatihan .
  • Module / Handout
  • FREE Flashdisk
  • Sertifikat
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive
  • Training room full AC and Multimedia

 

Ikuti Kami :

Be the first to comment

Leave a Reply

Alamat email Anda tidak akan dipublikasikan.


*