PELATIHAN MOTOR DRIVES, AUTOMATION SYSTEM & MOTOR INTENTER SYSTEM

Alamat Kantor

Jalan Raya Tajem, Dukuh Pokoh Baru, Perum Kampung Asri 2 No B2, RT 2 / RW 19,
Kelurahan Wedomartani, Kec. Ngemplak, Kab. Sleman,
Daerah Istimewa Yogyakarta, 55584. Telp : (0274) 4530527

TRAINING MOTOR DRIVES, AUTOMATION SYSTEM & MOTOR INTENTER SYSTEM

 

MOTOR DRIVES, AUTOMATION SYSTEM & MOTOR INTENTER SYSTEM

 

(3 days training)

DESKRIPSI
Electric Motor technical course will discuss application and installation issues related to motors, variable frequency drives and related automation products in three important sessions. The course will conclude with an operating demonstration that will illustrate the three types of equipment tied together into one system via communication cabling, as well as over air via radio transmission.
The Motors, Drives and Automation Systems course will provide the delegates with a solid base of Motor, Drive and Automation theory. The course will also make delegates aware of issues concerning the proper application, installation and maintenance of these types of equipment. The material handouts will cover a wide range starting from the basics and moving on to more complex issues (Application issues, Speed range, Torque Capability, Min Speed, Max Speed, Reversing, Stopping/Braking.

OBJECTIVE
•    Learn the Fundamentals of motors, drives and automation systems
•    Update Yourself on the Latest Advancements in VFDs
•    Learn the Latest Improvements in Motor Efficiency
•    Practical Approaches and Problem-Solving Solutions
•    Learn How to Solve Common Motor and VFD Problems
•    Learn Practical Troubleshooting Techniques

MATERI
OUTLINE MATERI :

A.    Session One: Electric Motors
1.    Electromagnetism
2.    Developing a Rotating Magnetic Field
3.    NEMA Rotor Characteristics
4.    Motor Specifications
5.    NEMA and IEEE standards
6.    Enclosures
7.    MG! Part 30 and Part 31 differences
8.    Impregnation Systems
9.    Stator Failures and preventative measures
10.    AC Rotor Construction
11.    Rotor Failures
12.    Enclosures, Frames & Cooling
13.    Bearings
14.    Bearing Failures
15.    Insulation Classes
16.    General Motor Testing Methods
17.    Motor Overhauls
18.    Motor Rewinds
19.    On-line Condition Monitoring
20.    Information Management for Decision-making
21.    Qualifying Repair Facilities
B.    Session Two: AC Drives
1.    VFD Overview
2.    Voltage And Frequency
3.    Basic AC Drive
4.    Constant Torque Applications
5.    Variable Torque Applications
6.    Constant Horsepower Applications
7.    Multi-motor Applications
8.    Input Filtering requirements
•    Line transients
•    Power Factor
•    Harmonic mitigation
9.    VFD Demonstration
10.    Output Filtering Requirements
•    Long Cable runs
•    Dv/dt voltage rise
•    Peak voltage
•    Bearing Currents
C.    Session Three: Human Machine Interface and Automation Considerations
1.    Introduction
2.    PLCs
3.    Number Systems
4.    Terminology
5.    Basic Requirements
6.    Connecting External Device
7.    Programming A PLC
•    Ladder Logic
•    Statement List
•    Function Blocks
8.    Discrete Inputs/Outputs
9.    Analog Inputs and Outputs
10.    High-Speed Instructions
11.    Communications
12.    Network Communications
•    ASI
•    Data Highway
•    Profibus
•    Device net
•    TCIP
13.    Demonstration
PESERTA
Industrial, Commercial, Institutional Electrical Engineering & Maintenance Technicians, Electric Motor Operations staff, Other electrical personnel involved in the operation and control of electric motors

METODE    INSTRUKTUR
•    Presentasi
•    Diskusi
•    Case Study
•    Simulasi
•    Evaluasi

Victor Malau, Ph.D and Team
(Pakar dalam bidang Mechanical & Maintenance, akademisi dan sekaligus praktisi, yang telah berpengalaman dalam memberikan training & consulting pada organisasi/perusahaan milik pemerintah maupun swasta)

Jadwal Pelatihan Berdiklat.com :

  • 2 sd 4 Januari 2018
  • 13 sd 15 Februari 2018
  • 27 sd 29 Maret 2018
  • 17 sd 19 April 2018
  • 7 sd 9 Mei 2018
  • 29 Mei sd 1 Juni 2018
  • 12 sd 14 Juni 2018
  • 17 sd 19 Juli 2018
  • 14 sd 16 Agustus 2018
  • 12 sd 14 September 2018
  • 16 sd 18 Oktober 2018
  • 21 sd 23 November 2018
  • 4 sd 6 Desember 2018
  • 26 sd 28 Desember 2018

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Invetasi dan Lokasi Pelatihan Berdiklat.com :

  • Yogyakarta, Hotel Dafam Malioboro, Hotel Cavinton (6.500.000 IDR / participant)
  • Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
  • Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
  • Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
  • Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant)
  • Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Training di Berdiklat.com :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  • FREE Akomodasi Peserta ke tempat pelatihan .
  • Module / Handout
  • FREE Flashdisk
  • Sertifikat
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive
  • Training room full AC and Multimedia

 

Ikuti Kami :

Gallery Foto Training

Be the first to comment

Leave a Reply

Alamat email Anda tidak akan dipublikasikan.


*