PELATIHAN MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE

Alamat Kantor

Jalan Raya Tajem, Dukuh Pokoh Baru, Perum Kampung Asri 2 No B2, RT 2 / RW 19,
Kelurahan Wedomartani, Kec. Ngemplak, Kab. Sleman,
Daerah Istimewa Yogyakarta, 55584. Telp : (0274) 4530527

TRAINING MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE

 

MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE

 

MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE
(3 days training)
DESKRIPSI
Industrial machinery or power plant is a major supporter of the industry and has a very high critical rate. This means that if there is a sudden damage, the industry will experience huge losses both morally and materially. Therefore, industrial machine that has a high critical level must be monitoring to avoid a sudden damage.  Maintenance techniques that can be applied is a preventive maintenance which the main point is a scheduled maintenance and predictive maintenance. By applying predictive maintenance, the symptoms of damage can be detected as early as possible and the cost of treatment can be suppressed.

Objectives
•    Participants understand machine condition monitoring techniques
•    Participants can choose the engine condition monitoring techniques
•    Participants can do the monitoring machine condition

MATERI
Outline Materi :
•    Maintenance techniques and  strategies
•    Basic regular maintenance
•    Basic predictive maintenance
•    Bathtub curve
•    Selection of machine condition monitoring techniques
•    Inspection / monitoring of visual
•    Use of lubricants
•    Lubricant contaminants
•    Inspection / monitoring and analysis of lubricants
•    Inspection / monitoring and vibration analysis
•    Vibration spectrum analysis
•    Inspection and monitoring of geometric
•    Analysis of leveling, run out and misalignment
•    Alignment shaft

PESERTA
Electrical Engineer / Supervisor / Instrument Engineer / Supervisor / Professionals / Plant Maintenance / Operators / Supervisors / Superintendent / Technician

METODE    INSTRUKTUR
•    Presentasi
•    Diskusi
•    Case Study
•    Simulasi
•    Evaluasi

 

Victor Malau, Ph.D and Team
(Pakar dalam bidang Mechanical & Maintenance, akademisi dan sekaligus praktisi, yang telah berpengalaman dalam memberikan training & consulting pada organisasi/perusahaan milik pemerintah maupun swasta)

Jadwal Pelatihan Berdiklat.com :

  • 2 sd 4 Januari 2018
  • 13 sd 15 Februari 2018
  • 27 sd 29 Maret 2018
  • 17 sd 19 April 2018
  • 7 sd 9 Mei 2018
  • 29 Mei sd 1 Juni 2018
  • 12 sd 14 Juni 2018
  • 17 sd 19 Juli 2018
  • 14 sd 16 Agustus 2018
  • 12 sd 14 September 2018
  • 16 sd 18 Oktober 2018
  • 21 sd 23 November 2018
  • 4 sd 6 Desember 2018
  • 26 sd 28 Desember 2018

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Invetasi dan Lokasi Pelatihan Berdiklat.com :

  • Yogyakarta, Hotel Dafam Malioboro, Hotel Cavinton (6.500.000 IDR / participant)
  • Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
  • Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
  • Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
  • Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant)
  • Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Training di Berdiklat.com :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  • FREE Akomodasi Peserta ke tempat pelatihan .
  • Module / Handout
  • FREE Flashdisk
  • Sertifikat
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive
  • Training room full AC and Multimedia

 

 

Ikuti Kami :

Gallery Foto Training

Be the first to comment

Leave a Reply

Alamat email Anda tidak akan dipublikasikan.


*