PELATIHAN INDUSTRIAL PUMP REPAIR

Alamat Kantor

Jalan Raya Tajem, Dukuh Pokoh Baru, Perum Kampung Asri 2 No B2, RT 2 / RW 19,
Kelurahan Wedomartani, Kec. Ngemplak, Kab. Sleman,
Daerah Istimewa Yogyakarta, 55584. Telp : (0274) 4530527

TRAINING PERBAIKAN POMPA INDUSTRI

PELATIHAN INDUSTRIAL PUMP REPAIR

Description
This 32 hour course offers intensive insight into industrial pump troubleshooting and repair. The participant will gain knowledge in pump maintenance, alignment and disassembly as well as predictive and preventative maintenance of industrial pumps. Class includes instructor led student labs on instructor’s trainers as well as customer’s own pumps. This course will be customized to suit customers’ specific needs.

Outline
I. Types of Industrial Pumps
A. Positive Displacement Pumps
1. Gear Pumps
2. Lobe Pumps
3. Piston Pumps
4.Vane Pumps
5. Diaphragm Pumps
B. Non-Positive Displacement Pumps
1. Centrifugal Pumps
II. Introduction to Positive Displacement Pumps
A. Gear Pump Basics
1. Pressure and suction sides
2. Pressure regulation
3. Sizing, HP and GPM
4. Disassembly for troubleshooting and repair
B. Lobe Pumps
1. Pressure and suction sides
2. Pressure regulation
3. Sizing, HP and GPM
4. Disassembly for troubleshooting and repair
C. Piston Pumps
1. Reciprocating pump basics
2. Reciprocating pumps operation
3. Single and multiple stage piston pumps
4. Disassembly for troubleshooting and repair
D. Vane Pumps
1.Vane pump usage
2.Vane pump operational basics
3. Troubleshooting and repair of diaphragm pumps
E. Diaphragm Pumps
1. Usage of the diaphragm pump
2. Diaphragm pump basics
3. Troubleshooting and repair of diaphragm pumps
F. Screw Pumps
1. Applications and usage of screw pumps
2. Operation of a screw pump
3. Troubleshooting and repair of a screw pump
III. Centrifugal Pumps
A. Single Stage Centrifugal Pumps
1. Pump laws of operation
2. What is Pump Head Pressure
3. Sizing a pumps impeller
4. Speed and diameter required to do the job
5. Disassembly, troubleshooting and repair of centrifugal pumps
B. Types of Centrifugal Pumps
1. Radial flow
2. Axial flow
3. Combination flow
C. Repairing a Centrifugal Pump
1. Step-by-step troubleshooting
2. Disassembly and repair
3. Pump packing
4. Mechanical and other types of pump seals
5. Troubleshooting pumps using pressure and flow information
IV. Basic Pump Alignment
A. Effects of Misalignment
B. Indicators of Misalignment
C. Causes of Misalignment
D. Correcting Pump Misalignment
1. Dial indicator alignment
a. Reverse dial method
b. Rim and face method
2. Precision straight edge alignment techniques
E. Correcting soft foot
V. Pump Bearings
A. Roller bearings
B. Sleeve bearings
V. Pump Terminology
A. Explanation and Definitions
VII. Instructor led student labs on instructor’s trainers as well as customer’s own pumps.

Course Length
32 hours.

Performance Objectives
At the completion of this course the participant will:
• Be able to troubleshoot failed pumps and prevent recurrence of failure.
• Have a better understanding of predictive and preventative maintenance of pumps.
• Be able to select the best type of packing or mechanical seals for the application.
• Understand the lubrication needs of the pump bearings.
• Be able to correctly set up a pump for maximum efficiency
• Understand the impeller relationship to pump head pressure.
• Be able to correct pump misalignment.

Who should attend?
Operator, maintenance, engineer

Instructor
Ir. Hermawan,M.Sc

 

Jadwal Pelatihan Berdiklat.com :

  • 2 sd 4 Januari 2018
  • 13 sd 15 Februari 2018
  • 27 sd 29 Maret 2018
  • 17 sd 19 April 2018
  • 7 sd 9 Mei 2018
  • 29 Mei sd 1 Juni 2018
  • 12 sd 14 Juni 2018
  • 17 sd 19 Juli 2018
  • 14 sd 16 Agustus 2018
  • 12 sd 14 September 2018
  • 16 sd 18 Oktober 2018
  • 21 sd 23 November 2018
  • 4 sd 6 Desember 2018
  • 26 sd 28 Desember 2018

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Invetasi dan Lokasi Pelatihan Berdiklat.com :

  • Yogyakarta, Hotel Dafam Malioboro, Hotel Cavinton (6.500.000 IDR / participant)
  • Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
  • Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
  • Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
  • Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant)
  • Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Training di Berdiklat.com :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  • FREE Akomodasi Peserta ke tempat pelatihan .
  • Module / Handout
  • FREE Flashdisk
  • Sertifikat
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive
  • Training room full AC and Multimedia

 

Ikuti Kami :

Be the first to comment

Leave a Reply

Alamat email Anda tidak akan dipublikasikan.


*