PELATIHAN EFFECTIVE FLANGE AND JOINT INTEGRITY IN MECHANICAL ENGINEERING

Alamat Kantor

Jalan Raya Tajem, Dukuh Pokoh Baru, Perum Kampung Asri 2 No B2, RT 2 / RW 19,
Kelurahan Wedomartani, Kec. Ngemplak, Kab. Sleman,
Daerah Istimewa Yogyakarta, 55584. Telp : (0274) 4530527

TRAINING EFFECTIVE FLANGE AND JOINT INTEGRITY IN MECHANICAL ENGINEERING

EFFECTIVE FLANGE AND JOINT INTEGRITY IN MECHANICAL ENGINEERING

(3 days training)
DESKRIPSI
In the oil & gas and petrochemical industries, compressors play important role to support all facilities and process that require pressurized gases. Furthermore, air or gas leakage is not acceptable since it affecting on productivity or safety. Hence compressor flange joint integrity should be taken into account.
The reliability of the flanged joint depends critically on competent control of the joint making process, alignment, assembly, and its measurement. It is common to put considerable effort into the design process only for improper assembly to lead to joint failure. Therefore it is important that joint making is undertaken by trained and validated technicians who have an understanding of the procedure and the underlying principles and practice.
To achieve better performance on flange joint, it is important to ensure that all individuals with responsibilities in connection with ensuring the safe control of flange joints are trained and validated as competent to undertake these responsibilities. The program is based around a presentation of best practices and utilizes an intelligent bolting system to explain and demonstrate these principles. This unique method allows key areas of joint making e.g. the need to use bolt lubricant, to be clearly understood.

MATERI
OUTLINE MATERI :
1.    Introduction to compressor alignment and assembly
2.    Flange Joint Preparation and Assembly
3.    Flange design and standard
4.    Bolt and bolt joint
5.    Bolt and flange strength
6.    Stress Analysis and Tightening Joints
7.    Load control vs torque control
8.    Load and torque measurement
9.    Intelligent bolt control
10.    Protection and Maintenance

PESERTA
Para karyawan di semua lini bagian Mechanical Engineering

METODE    INSTRUKTUR
•    Presentasi
•    Diskusi
•    Case Study
•    Simulasi
•    Evaluasi

Victor Malau, Ph.D and Team
(Pakar dalam bidang Mechanical & Maintenance, akademisi dan sekaligus praktisi, yang telah berpengalaman dalam memberikan training & consulting pada organisasi/perusahaan milik pemerintah maupun swasta)

Jadwal Pelatihan Berdiklat Training 2019 :

  • 15 sd 16 Januari 2019
  • 29 sd 30 Januari 2019
  • 12 sd 13 Februari 2019
  • 26 sd 27 Februari 2019
  • 5 sd 6 Maret 2019
  • 19 sd 20 Maret 2019
  • 9 sd 10 April 2019
  • 23 sd 24 April 2019
  • 7 sd 9 Mei 2019
  • 21 sd 22 Mei 2019
  • 12 sd 13 Juni 2019
  • 25 sd 26 Juni 2019
  • 9 sd 10 Juli 2019
  • 23 sd 24 Juli 2019
  • 13 sd 14 Agustus 2019
  • 27 sd 28 Agustus 2019
  • 10 sd 11 September 2019
  • 24 sd 25 September 2019
  • 8 sd 9 Oktober 2019
  • 22 sd 23 Oktober 2019
  • 5 sd 6 November 2019
  • 21 sd 20 November 2019
  • 3 sd 4 Desember 2019
  • 17 sd 18 Desember 2019

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda.

Biaya dan Lokasi Pelatihan :

  • Jakarta : Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget | Biaya Pelatihan : Rp. 7.500.000 / peserta(Minimal 2 Peserta).
  • Bandung : Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel | Biaya Pelatihan : Rp. Rp. 7.000.000 / peserta(Minimal 2 Peserta).
  • Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel | Biaya Pelatihan : Rp. 6.500.000 / peserta(Minimal 2 Peserta).
  • Surabaya : Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel | Biaya Pelatihan : Rp. 6.800.000 / peserta (Minimal 2 Peserta).
  • Malang : Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel | Biaya Pelatihan : Rp. 6.800.000 / peserta (Minimal 2 Peserta).
  • Bali : Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions | Biaya Pelatihan : Rp. 6.500.000 / peserta (Minimal 3 Peserta).
  • Lombok : Favehotel, Novotel Lombok, D Praya Hotel | Biaya Pelatihan : Rp. 7.000.000 / peserta (Minimal 3 Peserta).

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. Apabila ada pertayaan mengenai materi, biaya, lokasi, jadwal dan penawaran lainnya, hubungi kami di nomor 0823-2382-3308 atau 0853-2672-5665 .

Fasilitas Pelatihan di Berdiklat Training :

  1. Penjemputan dari Hotel/Bandara/Stasiun/Terminal.
  2. Training Kit (Dokumentasi photo, Blocknote, ATK, Flashdisk, dll).
  3. Transportasi Peserta ke tempat pelatihan.
  4. 2x Coffe Break & 1 Lunch (Makan Siang).
  5. Training Room Full AC and Multimedia.
  6. Free Bag or Bagpackers (Tas Training).
  7. Softfile Foto Training
  8. Sertifikat Pelatihan.
  9. Souvenir Exclusive.
Ikuti Kami :

Be the first to comment

Leave a Reply

Alamat email Anda tidak akan dipublikasikan.


*